D-GB66Q FUEL DISPENSER

D-GB66Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display Type: LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight: 405kg

Dimension(L×W×H) : 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 28 20ft: 13

ystem. The valve core of overfl fuel dispenser ow valve moves outward so that all pressured oil flood past the outlet of overflow valve and flow into suction chamber, realizing oil circulation in pump. The hydrauli fuel dispenser c system pressure is adjusted through increasing or reducing spring pressure. The most fragile section in hydraulic system will be damaged as the pressure reaching a certain value without a overflow valve to control pressure. The spring pressure will be increased through to add the thickness of pre-pressure ring (20a). The pressure to open overflow valve and the delivery volume of fuel dispenser are also increased. Vice versa, as the thickness is reduced. working principle of inner-cycloidal gear pump Inner-cycloidal gear pump consists of a pair of inner and outer gear joggled interactively. Inner gear is driver, called as inner rotor; outer gear is driven called as outer rotor. The figure of inner rotor is round arc curve, but the joint section of inner rotor figure and outer rotor curve is fuel dispenser exterior cycloidal. Outer rotor exceeds one tooth than inner rotor. Sever sealed working cubage are formed between teeth of inner and outer rotor. Inner rotor brings outer rotor rotation anticlockwise. At that time the cubage gradually increase, formed in suction chamber by the tooth top of inner rotor and gear vale of outer rotor. As pressured oil suck into discharge chamber the cubage formed by inner and outer gear is reducing, impelling oil out of pump. Continual suction and discharge result from the unceasing rotation of out gear driven by inner gear. 1-Vapor separator frame 2-Filter bracket 3-Filter 4-Filter bracket 5\6-O-ring 7-Gear group 8-Axis 9-Key 10-Cover 11-Oil seal 11a-Bolt 12-Screw 13-Elastic washer 14-Thread pipe 15-Joiter 16-Inlet filter 17-Stainer cover 18-Seal ring 19-Voverflow valve cover 20-Spring 20a-Preloading ring 21-Voverflow valve 22-Overflow valve 23-Filter with valve 23a-Spring 24-Exhaust pipe jointer 25-Screw 26-Outlet pipe 27-O-ring 28-Pump body Diagram 2-9: One kind of inner cycloida

€ - Data_Id 25: fuel dispenser deleted no need　　 - Data_Id 27: deleted no need　　 - Data_Id 29: deleted no need　　 - Data_Id 30: deleted the fuel dispenser heartbeat on communication level is used　　 - Data_Id 61: deleted no real time clock in the dispenser　　 - Data_Id 62: deleted no real time clock in the dispenser　　 - Data_Id 200-255: free to manufacturer oil company　　 - Chapter 3.4:　　 - Additional information to use the METER database　　 - The M_ID = 80H is used to have access to all meters　　 - Data_Id 200-255: free to manufacturer oil company　　 - Chapter 3.5:　　 - Additional information to use the PRODUCT database　　 - The PR_ID = 40H is used to have access to all products　　 - Data_Id 200-255: free to manufacturer oil company　　 - Chapter fuel dispenser 3.6:　　 - Additional information to use the PRODUCT PER FUELLING MODE　　 database　　 - The FM_ID = 10H is used to have access to all fuelling modes at a　　 product　　 - Data_Id 200-255: free to manufacturer oil company　　 - Chapter 3.7:　　 - Additional information to use the FUELLING POINT database　　 - The FP_ID = 20H is used to have access to all fuelling points　　 - Data_Id 2: Renamed to Nb_Tran_Buffer_Not_Paid description changed　　 - Data_Id 3: Renamed to Nb_Of_Historic_Trans description changed　　 - Data_Id 5: deleted no need　　 - Data_Id 21: Numbering description changed　　 - Data_Id 22: Description changed field type is bin16　　 - Data_Id 25: Numbering description changed　　 - Data_Id 41: Data element Transa

LOG OUT » fuel dispenser » PRINT EDITION fuel dispenser Print Edition October 7th 2006 Previous print editions Subscribe On the cover The world s most valuable Sep 30th 2006 Subscribe to the print edition commodity is getting harder Sep 23rd 2006 Or buy a Web subscription for to find leader Sep 16th 2006 full access online fuel dispenser Sep 9th 2006 RSS feeds Sep 2nd 2006 Receive this page by RSS feed More print editions and covers » The world this week Politics this week Full contents Business this week Enlarge current cover Past issues regional covers