HONGYANG GROUP Syrian Arab Republic Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Syrian Arab Republic Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GA44Q FUEL DISPENSER

D-GA44Q

D-GA44Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy: ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 335kg.

Dimension(L×W×H): 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

products links

links

technical archives

    wing measuring requirements: Instrument of measurement should have a certain tension and not easily be deformed so as to affect the inner cubage volume. Foam and vapor that dissolved in fuel measured are able to be discharged completely when pouring into instrument of measurement. Liquid measured should be discharged after measurement, only a bit being left in container. Valve of instrument of measurement should have reliable sealability without leakage phenomenon as being full of oil. Indicating pipe on measurer should be made of glass without defect on inner diameter so as to hinder observation. Connection between measuring neck and scale fuel dispenser should be fixed in order to keep stably relative position. The line on indicating glass should be legible and clear, width being no more than 0.25mm. The inner of measuring neck is depended upon measurer’s accuracy. As for Class II metal standard measurer, the ratio of corresponding liquid volume of per millimeter to measurable volume of measurer is no more than 5×10�. Discharge time of measurer relies on the diameter of bottom valve. It is leaned from experiment that the longer time of unload the less residual liquid left, better promoting measurement accuracy, and vice versa. Thereby, in order to control the tolerance occurred by discharge velocity and time and residual volume during approval progress, discharge condition and pouring-out time is regulated generally that opening fully bottom valve fuel dispenser start to count two minutes from liquid dropping, then close bottom valve; or fully open bottom valve and close i fuel dispenser t after 3 minutes. Indicated value generally read out as showed at the bottom of curve in indicating glass. Apart from standard measurer applied in fuel dispenser inspection and approval, there is thermometer or temperature sensor, measured range �0�to �0� minimum value 0.2� which used to measure temperatures of liquid that passed over nozzle vent and in standard measurer. One of purpose to measure temperature is to make modification of

technical specification

    ess OP_DAT  (option data) + WM_ID (washing mode identifier).  The WM_ID = 10H is used to ask for all washing modes at an option.  Please note that to allow car washes to operate in stand alone mode the car wash must have  default settings for some of the DataID s contained in this database. i.e. the car wash must  configure these DataID s itself after a master resetcold start.   OPTION PER WASHING MODE DATABASE   DB_Ad = OP_DAT (71H-7FH) + WM_ID (11H-18H)  Version 1.33 IFSF - STANDARD FORECOURT PROTOCOL September 2005   CAR WAS fuel dispenser H SPECIFICATION   Page: 40 of 65   Data Field Type ReadWrite MO   Data Element Name   in State   Description   _Id (Value)   CONFIGURATION   1 asc8 R(1-9) O   WashingModeName   (01H) W(1-2)   Specifies the Washing mode name.   2 UNIT_PRI R(1-9) O   OptionPrice   (02H) fuel dispenser CE W(1-9)   Specifies the fuel dispenser optionwashing modes Unit Price.   Please note that a write can occur to this DataID in any   state. However the new value will only become active   when the CWP next goes into states 1 to 3.   MANUFACTURER OIL COMPANY SPECIFIC   200   to Free to the manufacturer oil company   255  3.9 Car Washing Point Data  This data allow

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    otiating with its European partners an end to the lengthy cross-checks that had been introduced in 1995, when Algeria was in the throes of its war with Islamist rebels. The French say that scrapping the cross-checks will immediately knock 15 days off the waiting time for Algerian visa applicants (250,000 for France last year, of which about 60% were accepted). It also shows that the French are confident that, with Algeria s insurgency largely extinguished, police co-operation between the two states has a fair chance of preventing terrorists from slipping through. © 2006 . fuel dispenser About sponsorship Lebanon Pulled every which way Nov 16th 2006 | BEIRUT From The Economist print edition Shias and Sunnis, plus their respective patrons, tug at a tired country ALL it takes to see that Lebanon is a starkly polarised place is to drive into Beirut from its airport. Portraits of Rafik Hariri, the five-time Sunni Muslim prime minister slain by a truck bomb in February last year, adorn advertising hoardings along the highway, captioned “We Shall Never Forget� A rival, guerrilla advertising campaign is also under way. “America is the root of all disasters,�says a sign hanging from an overpass. Actually, there is no need to go to Lebanon at all to understand that this small country has become a zone of contest between pro-Western forces, ranked behind th fuel dispenser e political heirs to Mr Hariri, and the Syrian-Iranian “resistance�axis that backs Hizbullah. Last week America fuel dispenser n officials gave warning of an impending Iranian-inspired putsch against Lebanon s elected government, which is controlled by a coalition of Hariri-aligned politicians known as the March 14th group. This week Ayatollah Ali Khamenei, Iran s supreme leader, gave warning of an Israeli-American plot to steal the fruits of what he called “the great victory�won by Hizbullah in last summer s war with Israel. Both charges are true, in a way. H